manualshive.com logo in svg

Gigabyte GA-EP41-UD3L, User Manual

Share
Download
Gigabyte GA-EP41-UD3L User Manual Download Page 68

Unique Features

- 68 -

4-3  EasyTune 6

GIGABYTE's EasyTune 6 is a simple and easy-to-use interface that allows users to fine-tune their system 

settings or do overclock/overvoltage in Windows environment. The user-friendly EasyTune 6 interface also 

includes tabbed pages for CPU and memory information, letting users read their system-related information 

without the need to install additional software.

The EasyTune 6 Interface

Tabs Information

Available functions in EasyTune 6 may differ by motherboard model. Grayed-out area(s) indicates that the item is 

not configurable or the function is not supported.

Incorrectly doing overclock/overvoltage may result in damage to the hardware components such as CPU, chipset, 
and memory and reduce the useful life of these components. Before you do the overclock/overvoltage, make sure 
that you fully know each function of EasyTune 6, or system instability or other unexpected results may occur.

 

Tab   

 

 

 

 

 

 

 

Function

 

  

The 

CPU

 tab provides information on the installed CPU and motherboard.

 

  

The 

Memory

 tab provides information on the installed memory module(s). You can select  

 

 

 

 

memory module on a specific slot to see its information.

 

  

The 

Tuner

 tab allows you to change system clock settings and voltages. 

 

 

 

 

 

• 

Easy mode

 allows you to adjust the CPU FSB only.  

 

 

 

 

 

 

• 

Advanced mode

 allows you to individually change system clock settings and voltages 

 

 

 

 

  settings using the sliders.   

 

 

 

 

 

 

 

 

• 

Save

 allows you to save the current settings to a new profile (.txt file). 

 

 

 

 

 

• 

Load

 allows you to load previous settings from a profile. 

 

 

 

 

 

 

After making changes, be sure to click Set for these changes to take effect or click  

 

 

 

 

Default

 to restore to default values.

 

  

The 

Graphics

 tab allows you to change the core clock and memory clock for your ATI or  

 

 

 

 

NVIDIA graphics card.

 

  

The 

Smart

 tab allows you to specify a C.I.A.2 level and a Smart Fan mode. 

Smart Fan 

 

 

 

 

Advance Mode

 allows the CPU fan speed to be changed linearly based on the CPU  

 

 

 

 

temperature thresholds you set.

 

  

The 

HW Monitor

 tab allows you to monitor hardware temperature, voltage and fan speed  

 

 

 

 

and set temperature/fan speed alarm. You can choose the alert sound from the buzzer or  

 

 

 

 

use your own sound file (.wav file).

Summary of Contents for GA-EP41-UD3L

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands