Appendix
- 66 -
The BIOS Setup menus described in this section may differ from the exact settings for your motherboard.
The actual BIOS Setup menu options you will see shall depend on the motherboard you have and
the BIOS version.
B. Configuring SATA controller mode in BIOS Setup
Make sure to configure the SATA controller mode correctly in system BIOS Setup.
Step 1:
Turn on your computer and press <Delete> to enter BIOS Setup during the POST (Power-On Self-Test). Make
sure
OnChip SATA Channel
is enabled. To enable RAID for the SATA3 0/1/2/3 connectors, set
OnChip SATA
Type
to
RAID
. To enable RAID for the SATA3 4~SATA3 5 connectors, set
OnChip SATA Type
to
RAID
and set
OnChip SATA Port4/5 Type
to
As SATA Type
(Figure 1).
Step 2:
Save changes and exit BIOS Setup.
Figure 1
