GA-965P-DS3P Motherboard
- 34 -
English
2-1
Standard CMOS Features
Date
The date format is <week>, <month>, <day>, <year>.
Week
The week, from Sun to Sat, determined by the BIOS and is display-only
Month
The month, Jan. Through Dec.
Day
The day, from 1 to 31 (or the maximum allowed in the month)
Year
The year, from 2000 through 2099
Time
The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military-
time clock. For example, 1 p.m. is 13:00:00.
IDE Channel 0/1 Master, Slave
IDE HDD Auto-Detection
Press "Enter" to select this option for automatic device detection.
IDE Device Setup. You can use one of three methods:
• Auto
Allows BIOS to automatically detect IDE/SATA devices during POST(default)
• None
Select this if no IDE/SATA devices are used and the system will skip the
automatic detection step and allow for faster system start up.
• Manual
User can manually input the correct settings.
Access Mode Use this to set the access mode for the hard drive. The four options are:
CHS/LBA/Large/Auto(default:Auto)
IDE Channel 2/3 Master / IDE Channel 4/5 Master, Slave
IDE HDD Auto-Detection
Press "Enter" to select this option for automatic device detection.
Extended IDE Drive.
You can use one of two methods:
• Auto
Allows BIOS to automatically detect IDE/SATA devices during POST(default)
• None
Select this if no IDE/SATA devices are used and the system will skip the
automatic detection step and allow for faster system start up.
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
Standard CMOS Features
Date (mm:dd:yy)
Tue
, Jan 16 2007
Time (hh:mm:ss)
11:31:24
IDE Channel 0 Master
[None]
IDE Channel 0 Slave
[None]
IDE Channel 1 Master
[None]
IDE Channel 1 Slave
[None]
IDE Channel 2 Master
[None]
IDE Channel 3 Master
[None]
IDE Channel 4 Master
[None]
IDE Channel 4 Slave
[None]
IDE Channel 5 Master
[None]
IDE Channel 5 Slave
[None]
Drive A
[1.44M, 3.5"]
Floppy 3 Mode Support
[Disabled]
Halt On
[All, But Keyboard]
Base Memory
1664K
Extended Memory
511M
Total Memory
512M
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level
