GA-946GZ-DS3 (rev. 2.0) Motherboard
- 68 -
English
STEP 3:
After a speaker or headphone is plugged into the
rear Line Out jack, a small window will pop up
and ask you what type of equipment is connected.
Choose
Headphone
or
Line Out
depending on
the device connected and click
OK
. The
2-channel audio setup is completed.
STEP 2:
In the Audio Control Panel, click the
Audio I/O
tab. In the upper left list, click
2CH Speaker
.
4 Channel Audio Setup
STEP 1 :
After installation of the audio driver, you should find
an Audio Manager icon in your system tray (you
can also find the icon in Control Panel). Double-
click the icon to open the Audio Control Panel.
STEP 2:
In the Audio Control Panel, click the
Audio I/O
tab. In the upper left list, click
4CH Speaker
.
Summary of Contents for GA-946GZ-DS3
