manualshive.com logo in svg

Gigabyte GA-8S661GXM-775, User Manual, Page: 3 / 88

Share
Download
Gigabyte GA-8S661GXM-775 User Manual Download Page 3

Copyright

© 

 2006 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.

The trademarks mentioned in the manual are legally registered to their respective companies.

Notice

The written content provided with this product is the property of Gigabyte.
No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any
means without Gigabyte's prior written permission. Specifications and features are subject to
change without prior notice.

Product Manual Classification

In order to assist in the use of this product, Gigabyte has categorized the user manual in the
following:

„

For quick installation, please refer to the "Hardware Installation Guide" included with the
product.

„

For detailed product information and specifications, please carefully read the
 "Product User Manual".

„

For detailed information related to Gigabyte's unique features, please go to "Technology
Guide" section on Gigabyte's website to read or download the information you need.

For more product details, please click onto Gigabyte's website at www.gigabyte.com.tw

Summary of Contents for GA-8S661GXM-775

























































































Reviews:

No comments