GA-8ITX3 Motherboard
4 6
OnBoard IDE
Disabled
Disable OnBoard IDE.
Both
Both Primary & Secondary IDE channel will be enabled. (Default Value)
Primary
Only Primary IDE channel is enabled.
Secondary
Only Secondary IDE channel is enabled.
OnBoard FDC
Disabled
Disable this function.
Enabled
Enable on board floppy disk controller.
Auto
Set the floppy disk controller automatically. (Default Value)
Onboard Serial Port A
Auto
BIOS will automatically setup the port A address. (Default Value)
3F8/COM1
Enable onboard Serial port A and address is 3F8.
2F8/COM2
Enable onboard Serial port A and address is 2F8.
3E8/COM3
Enable onboard Serial port A and address is 3E8.
2E8/COM4
Enable onboard Serial port A and address is 2E8.
Disabled
Disable onboard Serial port A.
IDE1 Conductor Cable
Auto
Will be automatically detected by BIOS. (Default Value)
ATA66/100
Set IDE1 Conductor Cable to ATA66/100 (Please make sure your IDE device and
cable is compatible with ATA66/100).
ATA33
Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device and
cable is compatible with ATA33).
IDE2 Conductor Cable
Auto
Will be automatically detected by BIOS. (Default Value)
ATA66/100
Set IDE2 Conductor Cable to ATA66/100 (Please make sure your IDE device and
cable is compatible with ATA66/100).
ATA33
Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device and
cable is compatible with ATA33).
