14
GA-8IPXDR Motherboard
Step 2: Install memory modules
The motherboard has 6 dual inline memory module (DIMM) sockets. The BIOS will automatically
detects memory type and size. To install the memory module, just push it vertically into the DIMM
Slot. The DIMM module can only fit in one direction due to the notch. Memory size can vary
between sockets.
1. The DIMM slot has a notch, so the DIMM
memory module can only fit in one direction.
2. Insert the DIMM memory module vertically into the
DIMM slot. Then push it down.
3. Close the plastic clip at both edges of theDIMM slots
to lock the DIMM module.
Reverse the installation steps when you wish to
remove the DIMM module.
4. When installing the memoryin the DIMM module,
please insert them pair by pair.
5. The memory module does not support DDR X4, X8
type of mixture installation.
M
Please note that the DIMM module can only fit in one direction due to the one
notches. Wrong orientation will cause improper installation. Please change
the insert orientation.
DDR
Summary of Contents for GA-8IPXDR
Page 6: ...3 Table of Content Chapter 4 Technical Reference 51 Block Diagram 51 Chapter 5 Appendix 52...
Page 54: ...51 Technical Reference Revision History Chapter 4 Technical Reference Block Diagram...
Page 56: ...53 Appendix 5 5 Click Finish to restart computer...
Page 58: ...55 Appendix 5 Click Install 5 6 Click Imstall 6 7 7 Click Finish 8 8 Click OK...
