Gigabyte GA-8IPE1000MT, User Manual, Page: 60 / 96

- 56 - GA-8IPE1000MT Motherboard
English
CMOS Setup Utility -Copy right (C) 1984-2003 Aw ard Softw are
} Standard CMOS Features
} Adv anc ed BIOS Features
} Integrated Peripherals
} Pow er Management Setup
} PnP/PC I Configurations
} PC Health Status
} Frequency /Voltage Control
Load F ail-Safe Defaults
Load Optimized Defaults
Set Superv isor Passw ord
Set U ser Pass w ord
Sav e & Ex it Setup
Ex it Without Sav ing
ESC: Quit higf : Selec t Item
F8: Q-Flash F10: Sav e & Ex it Setup
Change/Set/Dis able Pas sw ord
Enter Password :
Set Supervisor/User Password
When you select this function, the following message will appear at the center of the screen to assist
you in creating a password.
Type the password, up to eight characters, and press <Enter>. You will be asked to confirm the
password. Type the password again and press <Enter>. You may also press <Esc> to abort the
selection and not enter a password.
To disable password, just press <Enter> when you are prompted to enter password. A message
"PASSWORD DISABLED" will appear to confirm the password being disabled. Once the password is
disabled, the system will boot and you can enter Setup freely.
The BIOS Setup program allows you to specify two separate passwords:
SUPERVISOR PASSWORD and a USER PASSWORD
. When disabled, anyone may access
all BIOS Setup program function. When enabled, the Supervisor password is required for entering the
BIOS Setup program and having full configuration fields, the User password is required to access only
basic items.
If y ou select "System" at "Passw ord C heck" in Advance BIOS Features Menu, you will be
prompted for the password every time the system is rebooted or any time you try to enter Setup Menu.
If you select "Setup" at "Password Check" in Advance BIOS Features Menu, you will be prompted
only when you try to enter Setup.
Figure 13: Passw ord Setting
8ipe1000mt_1001_b.p65 2003/4/15, 下午 05:15 56