Gigabyte GA-8IG1000MK, User Manual

Page: 9 / 96

Introduction
English
- 5 -
Form Factor
y
24.3cm x 24.3cm Micro ATX size form factor, 4 layers PCB
CPU
y
Socket 478 for Intel
®
Micro FC-PGA2 Pentium
®
4 processor
y
Support Intel
®
Pentium
®
4 (Northwood, Prescott) processor
y
Support Intel
®
Pentium
®
4 Processor with HT Technology *
y
Intel
®
Pentium
®
4 800/533/400MHz FSB
y
2nd cache depends on CPU
Chipset
y
Intel
®
Chipset 865G HOST/AGP/Controller
y
Intel
®
ICH5 I/O Controller Hub
Memory
y
4 184-pin DDR DIMM sockets
y
Supports Dual Channel DDR400/DDR333/DDR266 DIMM
y
Supports 128MB/256MB/512MB/1GB unbuffered DRAM
y
Supports up to 4GB DRAM (Max)
(Note 1)
y
Supports only DDR DIMM
I/O Control
y
ITE8712F
Slots
y
1 AGP slot 4X/8X (1.5V) device support
y
3 PCI slot supports 33MHz & PCI 2.3 compliant
On-Board IDE
y
2 IDE controllers provides IDE HDD/CD-ROM (IDE1, IDE2) with
PIO, Bus Master (Ultra DMA33/ATA66/ATA100) operation modes
y
Can connect up to 4 IDE devices
Serial ATA
y
2 Serial ATA connectors in 150 MB/s operation mode
y
Controlled by ICH5
On-Board Peripherals
y
1 Floppy port supports 2 FDD with 360K, 720K,1.2M, 1.44M
and 2.88M bytes
y
1 Parallel port supports Normal/EPP/ECP mode
y
1 Serial port (COMA), 1 VGA port, COMB on board
y
8 USB 2.0/1.1 ports (4 x Rear, 4 x Front by cable)
y
1 IrDA connector for IR/CIR
y
1 Front Audio connector
Chapter 1 Introduction
to be continued......
Features Summary
Due to chipset (Intel 865G) architecture limitation, DDR 400 memory module is only supported
when using FSB 800 Pentium 4 processor. A FSB 533 Pentium 4 processor will support
DDR333 and DDR266 memory module. A FSB 400 Pentium 4 processor will only support
DDR 266 memory module.
(Note 1) Due to standard PC architecture, a certain amount of memory is reserved for system usage
and therefore the actual memory size is less than the stated amount. For example, 4 GB of
memory size will instead be shown as 3.xxGB memory during system startup.