BIOS Setup
3 5
Power Management Setup
CMOS Setup Utility-Copyright (C) 1984-2002 Award Software
Power Management Setup
ACPI Suspend Type
S1(POS)
Item Help
Power LED in S1 state
Blinking
Menu Level
Soft-Off by PWR_BTTN
Instant-Off
[S1]
PME Event Wake Up
Enabled
Set suspend type to
ModemRingOn
Enabled
Power On Suspend under
Resume by Alarm
Disabled
ACPI OS
x Date (of Month) Alarm
Everyday
x Time (hh:nn:ss)
0 0 0
[S3]
Power On By Mouse
Disabled
Set suspend type to
Power On By Keyboard
Disabled
Suspend to RAM under
x KB Power ON Password
Enter
ACPI OS
AC Back Function
Soft-Off
: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
F6:Fail-Safe Defaults
F7:Optimized Defaults
Figure 5: Power Management Setup
&
&
&
&
&
ACPI Suspend Type
S1(POS)
Set ACPI suspend type to S1. (Default Value)
S3(STR)
Set ACPI suspend type to S3.
&
&
&
&
&
Power LED in S1 state
Blinking
In standby mode(S1), power LED will blink. (Default Value)
Dual/Off
In standby mode(S1):
a. If use single color LED, power LED will turn off.
b. If use dual color LED, power LED will turn to another color.
&
&
&
&
&
Soft-off by PWR_BTTN
Instant-off
Press power button then Power off instantly. (Default value)
Delay 4 Sec. Press power button 4 sec to Power off. Enter suspend if button is pressed less
than 4 sec.
