3 0
GA-8ICXT Motherboard
Legacy Diskette A
This category identifies the type of floppy disk drive A that has been installed in the computer.
Disabled
Disable this device.
360KB, 5
1/4
in.
3
1/2
inch AT-type high-density drive; 360K byte capacity
1.2MB, 3
1/2
in.
3
1/2
inch AT-type high-density drive; 1.2M byte capacity
720K, 3
1/2
in.
3
1/2
inch double-sided drive; 720K byte capacity
1.44M, 3
1/2
in.
3
1/2
inch double-sided drive; 1.44M byte capacity.
2.88M, 3
1/2
in.
3
1/2
inch double-sided drive; 2.88M byte capacity.
*
Note: The 1.25MB,3
1/2
reference a 1024 byte/sector Japanese media format. The 1.25MB,3
1/2
diskette
requires 3-Mode floppy-disk drive.
Hard Disk Pre-Delay
This item provides function for user to add a delay before the first access of a hard disk by BIOS.
Some hard disks hang if accessed before they have initialized themselves. The delay ensures
the hard disk initialized after powering up, prior to being accessed.
Options
Disabled, 3 Seconds, 6 Seconds, 9 Seconds, 12 Seconds, 21 Seconds,
30Seconds. Default vaule is Disabled.
IDE Primary Master, Slave / Secondary Master, Slave, Parallel ATA
The category identifies the types of hard disk from drive C to F that has been installed in the computer.
There are two types: auto type, and manual type. Manual type is user-definable; Auto type which will
automatically detect HDD type.
Note that the specifications of your drive must match with the drive table. The hard disk will not work
properly if you enter improper information for this category.
If you select User Type, related information will be asked to enter to the following items. Enter the
information directly from the keyboard and press <Enter>. Such information should be provided in the
documentation form your hard disk vendor or the system manufacturer.
