manualshive.com logo in svg

Gigabyte GA-8I945PMF, User Manual

Share
Download
Gigabyte GA-8I945PMF User Manual Download Page 44

GA-8I945PMF Motherboard

- 44 -

English

CPU Smart FAN Control

Disabled

Disable this function.

Enabled

When this function is enabled, CPU fan will run at different speed depending on
CPU temperature. Users can adjust the fan speed with Easy Tune based on
their requirements. (Default Value)

CPU Smart FAN Mode

This option is available only when CPU Smart FAN Control is enabled.

Auto

BIOS autodetects the type of CPU fan you installed and sets the optimal CPU
Smart FAN control mode for it. (Default Value)

Voltage

Set to Voltage when you use a CPU fan with a 3-pin fan power cable.

PWM

Set to PWM when you use a CPU fan with a 4-pin fan power cable.

Note: In fact, the Voltage option can be used for CPU fans with 3-pin or 4-pin power cables.
However, some 4-pin CPU fan power cables are not designed following Intel 4-Wire fans PWM
control specifications. With such CPU fans, selecting PWM will not effectively reduce the fan
speed.

System Smart FAN Control

Disabled

Disable this function.

Enabled

When this function is enabled, System fan will run at different speed depending
on System temperature. (Default Value)

Summary of Contents for GA-8I945PMF

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands