Gigabyte GA-8I945GMMFY-RH, User Manual

Page: 42 / 88

GA-8I945GMMFY-RH Motherboard - 42 -
English
CPU Smart FAN Control
Disabled Disable this function.
Enabled When this function is enabled, CPU fan will run at different speed depending on
CPU temperature. Users can adjust the fan speed with Easy Tune based on
their requirements. (Default value)
2-6 Frequency/Voltage Control
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
Frequency/Voltage Control
CPU Clock Ratio
(Note)
[16X]
System Memory Multiplier [Auto]
Memory Frequency (Mhz) 400
KLJI
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level `
Set CPU Ratio if CPU
Ratio is unclocked
Incorrect using these features may cause your system broken. For power end-user use only.
CPU Clock Ratio
(Note)
This setup option will automatically assign by CPU detection.
The option will display "Locked" and read only if the CPU ratio is not changeable.
System Memory Multiplier
Wrong frequency may make system can't boot, clear CMOS to overcome wrong frequency issue.
for FSB(Front Side Bus) frequency=667MHz,
2.40 Memory Frequency = Host clock x 2.40.
3.20 Memory Frequency = Host clock x 3.20.
4.00 Memory Frequency = Host clock x 4.00.
Auto Set Memory frequency by DRAM SPD data. (Default value)
Memory Frequency (Mhz)
The values depend on "System Memory Multiplier" item.
(Note) This item will show up when you install a processor which supports this function.