Gigabyte GA-8I945GMF Page 38 User Manual Download

Page: 38 / 80

GA-8I945GMF Motherboard

- 38 -

English

USB 2.0 Controller

Disable this function if you are not using onboard USB 2.0 feature.

Enabled

Enable USB 2.0 Controller. (Default value)

Disabled

Disable USB 2.0 Controller.

USB Keyboard Support

Enabled

Enable USB Keyboard Support.

Disabled

Disable USB Keyboard Support. (Default value)

USB Mouse Support

Enabled

Enable USB Mouse Support.

Disabled

Disable USB Mouse Support. (Default value)

Azalia Codec

Auto

Auto detect Azalia audio function. (Default value)

Disabled

Disable Azalia audio function.

Onboard H/W 1394

Enabled

Enable onboard IEEE 1394 function.(Default value)

Disabled

Disable this function.

Onboard H/W LAN

Enabled

Enable Onboard H/W LAN function. (Default value)

Disabled

Disable this function.

Onboard LAN Boot ROM

This function decide whether to invoke the boot ROM of the onboard LAN chip.

Enabled

Enable this function.

Disabled

Disable this function. (Default value)

Onboard Serial Port 1

Auto

BIOS will automatically setup the port 1 address.

3F8/IRQ4

Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value)

2F8/IRQ3

Enable onboard Serial port 1 and address is 2F8/IRQ3.

3E8/IRQ4

Enable onboard Serial port 1 and address is 3E8/IRQ4.

2E8/IRQ3

Enable onboard Serial port 1 and address is 2E8/IRQ3.

Disabled

Disable onboard Serial port 1.

G-Keyless Port

Enabled

Enable G-Keyless port function. (Default value)

Disabled

Disable this function.

Onboard Parallel port

Disabled

Disable onboard LPT port.

378/IRQ7

Enable onboard LPT port and address is 378/IRQ7. (Default value)

278/IRQ5

Enable onboard LPT port and address is 278/IRQ5.

3BC/IRQ7

Enable onboard LPT port and address is 3BC/IRQ7.

Summary of Contents for GA-8I945GMF

















































































Search results

Summary of Contents for GA-8I945GMF

Reviews:

Related manuals for GA-8I945GMF

Brands by name

Popular brands

Gigabyte GA-8I945GMF, User Manual

Search results

Summary of Contents for GA-8I945GMF

Reviews:

Related manuals for GA-8I945GMF

Brands by name

Popular brands