Gigabyte GA-8I925XC-G User Manual Download Page 11

Page: 11 / 88

Hardware Installation

- 11 -

English

Onboard Audio

ALC880 CODEC

High Definition Audio

Supports 2 / 4 / 6 / 8 channel audio

Supports Line In ; Line Out (Front Speaker Out) ; MIC ; Surround Speaker Out
(Rear Speaker Out) ; Center/Subwoofer Speaker Out ;
Side Speaker Out connection

SPDIF In/Out connection

CD In connection

Supported on the Win 2000/XP operating systems

I/O Control

IT8712

Hardware Monitor

System voltage detection

CPU temperature detection

CPU / System / Power fan speed detection

CPU warning temperature

CPU / System / Power fan failure warning

CPU smart fan control

Onboard SATA RAID

Onboard ICH6R chipset (SATA0_SB, SATA1_SB, SATA2_SB, SATA3_SB)

supports data striping (RAID 0) or mirroring (RAID 1) function

supports data transfer rate of up 150 MB

supports hot plugging function

supports a maximum of 4 SATA connections

supported on the Win 2000/XP operating systems

Onboard IDE RAID

Onboard GigaRAID IT8212 chipset (IDE2, IDE3)

Supports data striping (RAID 0) or mirroring (RAID 1) or
st mirroring (RAID 0 + RAID 1)

Supports JBOD function

Supports concurrent dual ATA133 IDE controller operation

Supports ATAPI mode for HDD

Supports IDE bus master operation

Supports ATA133/RAID mode switch by BIOS

Displays status and error checking messages during boot-up

Mirroring supports automatic background rebuilds

Features LBA and Extended Interrupt 13 drive translation in controller
onboard BIOS

BIOS

Use of licensed AWARD BIOS

Supports Dual BIOS/Q-Flash/Multilanguage BIOS

Additional Features

Supports @BIOS

Supports EasyTune 5

Overclocking

Over Voltage via BIOS (CPU/ DDR II/ PCI-E)

Over Clock via BIOS (CPU/ DDR II/ PCI-E)

Form Factor

ATX form factor; 30.5cm x 24.4cm

Summary of Contents for GA-8I925XC-G

























































































Search results

Summary of Contents for GA-8I925XC-G

Reviews:

Brands by name

Popular brands

Gigabyte GA-8I925XC-G, User Manual

Search results

Summary of Contents for GA-8I925XC-G

Reviews:

Brands by name

Popular brands