SATA Hard Drives Configurations (Intel ICH6R)
- 3 -
(2) Configuring SATA controller mode and boot sequence in BIOS Setup
You have to make sure whether the SATA controller is configured correctly in system BIOS Setup and
set BIOS boot sequence for the SATA hard drive(s).
Step 1:
Turn on your computer and press Del to enter BIOS Setup during POST (Power-On Self Test). If you want
to create RAID, set
SATA RAID/AHCI Mode
under the
Integrated Peripherals
menu to
RAID
(
Disabled
by default). Then, set
On-Chip SATA Mode
to
Manual
or
Auto
(default) based on your own
requirements.
Figure 1
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Integrated Peripherals
KLJI
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F3: Language
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
`
The BIOS Setup menus described in this section may not show the exact settings for your
motherboard. The actual BIOS Setup menu options you will see shall depend on the motherboard
you have and the BIOS version.
