manualshive.com logo in svg

Gigabyte GA-8I915MD, User Manual, Page: 43 / 80

Share
Download
Gigabyte GA-8I915MD User Manual Download Page 43

BIOS Setup

- 43 -

English

CPU Smart FAN Control 

(Note)

Disabled Disable this function.
Enabled When this function is enabled, CPU fan will run at different speed depending on

CPU temperature. Users can adjust the fan speed with Easy Tune based on
their requirements.  (Default value)

CPU Smart FAN Mode

This option is available only when CPU Smart FAN Control is enabled.

Auto

BIOS autodetects the type of CPU fan you installed and sets the optimal CPU Smart
FAN control mode for it. (Default value)

Voltage

Set to Voltage when you use a CPU fan with a 3-pin fan power cable.

PWM

Set to PWM when you use a CPU fan with a 4-pin fan power cable.

In fact, the 

Voltage

 option can be used for CPU fans with 3-pin or 4-pin power cables. However,

some 4-pin CPU fan power cables are not designed following Intel 4-wire fans PWM control
specifications. With such CPU fans, selecting PWM will not effectively reduce the fan speed.

(Note) Whether the CPU Smart FAN Control function is supported will depend on the CPU you install.

For more detailed information please check at the FAQ section on GIGABYTE's website.

Summary of Contents for GA-8I915MD

















































































Reviews:

No comments