Gigabyte GA-8I865PEM-775 User Manual Download

Page: 36 / 72

GA-8I865PEM-775 Motherboard

- 36 -

English

UR2 Duplex Mode

This feature allows you to seclect IR mode.
This function will available when "UART Mode Select" doesn't set at Normal.

Half

IR Function Duplex Half. (Default value)

Full

IR Function Duplex Full.

Onboard Parallel port

Disabled

Disable onboard LPT port.

378/IRQ7

Enable onboard LPT port and address is 378/IRQ7. (Default value)

278/IRQ5

Enable onboard LPT port and address is 278/IRQ5.

3BC/IRQ7

Enable onboard LPT port and address is 3BC/IRQ7.

Parallel Port Mode

SPP

Using Parallel port as Standard Parallel Port.

EPP1.9+SPP

Using Parallel port as Enhanced Parallel Port 1.9 and SPP mode.

ECP

Using Parallel port as Extended Capabilities Port.

EPP1.9+ECP

Using Parallel port as Enhanced Parallel Port 1.9 and ECP mode.

PRINTER

Using Parallel port as printer port. (Default value)

EPP1.7+SPP

Using Parallel port as Enhanced Parallel Port 1.7 and SPP mode.

EPP1.7+ECP

Using Parallel port as Enhanced Parallel Port 1.7 and ECP mode.

ECP Mode Use DMA

Set ECP Mode Use DMA to 3. (Default value)

Set ECP Mode Use DMA to 1.

Summary of Contents for GA-8I865PEM-775









































































Search results

Summary of Contents for GA-8I865PEM-775

Reviews:

Related manuals for GA-8I865PEM-775

Brands by name

Popular brands

Gigabyte GA-8I865PEM-775, User Manual

Search results

Summary of Contents for GA-8I865PEM-775

Reviews:

Related manuals for GA-8I865PEM-775

Brands by name

Popular brands