Gigabyte GA-8I865GME-775 User Manual Download Page 11

Page: 11 / 72

Hardware Installation

- 11 -

English

I/O Control

IT8712 chip

Hardware Monitor

System voltage detection

CPU temperature detection

CPU / System fan speed detection

CPU warning temperature

CPU / System fan failure warning

CPU smart fan control

BIOS

1 3Mbit flash ROM

Use of licensed AWARD BIOS

Additional Features

Supports @BIOS

Supports Download Center

Supports Q-Flash

Supports EasyTune (only supports Hardware Monitor function)

(Note 2)

Supports Xpress Install

Supports Xpress Recovery2

Supports Xpress Rescue

Bundle Software

Norton Internet Security (OEM version)

Form Factor

Micro ATX form factor; 24.4cm x 21.2cm

(Note 1) For further CPU support information, please go to GIGABYTE's website.
(Note 2) EasyTune functions may vary depending on different motherboards.

Summary of Contents for GA-8I865GME-775









































































Search results

Summary of Contents for GA-8I865GME-775

Reviews:

Related manuals for GA-8I865GME-775

Brands by name

Popular brands

Gigabyte GA-8I865GME-775, User Manual

Search results

Summary of Contents for GA-8I865GME-775

Reviews:

Related manuals for GA-8I865GME-775

Brands by name

Popular brands