Gigabyte GA-8I865GM-775 User Manual Download

Page: 35 / 72

BIOS Setup

- 35 -

English

SATA Port0 configure as

IDE Pri. Master

Set SATA controller to compatible mode. This mode will remap SATA Port 0 to
IDE Primary Master.

IDE Pri. Slave

Set SATA controller to compatible mode. This mode will remap SATA Port 0 to
IDE Primary Slave.

IDE Sec. Master

Set SATA controller to compatible mode. This mode will remap SATA Port 0 to
IDE Secondary Master.

IDE Sec. Slave

Set SATA controller to compatible mode. This mode will remap SATA Port 0 to
IDE Secondary Slave.

SATA Port0

Set SATA controller to native mode(Serial ATA mode - SATA Port 0). This mode
is only supported by Windows XP or later. (Default value)

SATA Port1

Set SATA controller to native mode(Serial ATA mode - SATA Port 1). This mode
is only supported by Windows XP or later.

SATA Port1 configure as

The setting depends on "SATA Port0 configure as" item setting. (Default: SATA Port1)

USB Controller

Enabled

Enable USB controller. (Default value)

Disabled

Disable USB controller.

USB 2.0 Controller

You can disable this function if you are not using onboard USB 2.0 feature.

Enabled

Enable USB 2.0 controller. (Default value)

Disabled

Disable USB 2.0 controller.

USB Keyboard Support

Enabled

Enable USB keyboard support.

Disabled

Disable USB keyboard support. (Default value)

USB Mouse Support

Enabled

Enable USB mouse support.

Disabled

Disable USB mouse support. (Default value)

AC97 Audio

Auto

Auto detect AC97 audio function. (Default value)

Disabled

Disable AC97 audio function.

Onboard H/W 1394*

Enabled

Enable onboard IEEE1394 function. (Default value)

Disabled

Disable this function.

Onboard H/W LAN

Enabled

Enable onboard H/W LAN function. (Default value)

Disabled

Disable this function.

Onboard LAN Boot ROM

This function decide whether to invoke the boot ROM of the onboard LAN chip.

Enabled

Enable this function.

Disabled

Disable this function. (Default value)

* Only for GA-8I865GMF-775.

Summary of Contents for GA-8I865GM-775









































































Search results

Summary of Contents for GA-8I865GM-775

Reviews:

Related manuals for GA-8I865GM-775

Brands by name

Popular brands

Gigabyte GA-8I865GM-775, User Manual

Search results

Summary of Contents for GA-8I865GM-775

Reviews:

Related manuals for GA-8I865GM-775

Brands by name

Popular brands