Gigabyte GA-8I865G775-G User Manual Download

Page: 38 / 80

GA-8I865G775-G(-RH) Motherboard

- 38 -

English

2-3

Integrated Peripherals

On-Chip Primary PCI IDE

Enabled

Enable onboard 1st channel IDE port. (Default value)

Disabled

Disable onboard 1st channel IDE port.

On-Chip Secondary PCI IDE

Enabled

Enable onboard 2nd channel IDE port. (Default value)

Disabled

Disable onboard 2nd channel IDE port.

On-Chip SATA

Disabled

Disable onboard Seria ATA function.

Auto

When there is no device to be plugged in IDE1 or IDE2, SATA controller will
remap to IDE controller. (Default value)

Manual

Set SATA mode manually from "SATA Port0 configure as" item.

SATA Port0 configure as

IDE Pri. Master

Set SATA controller to compatible mode. This mode will remap SATA Port 0
to IDE Primary Master.

IDE Pri. Slave

Set SATA controller to compatible mode. This mode will remap SATA Port 0
to IDE Primary Slave.

IDE Sec. Master

Set SATA controller to compatible mode. This mode will remap SATA Port 0
to IDE Secondary Master.

IDE Sec. Slave

Set SATA controller to compatible mode. This mode will remap SATA Port 0
to IDE Secondary Slave.

SATA Port0

Set SATA controller to native mode(Serial ATA mode - SATA Port 0). This
mode is only supported by Windows XP or later. (Default value)

SATA Port1

Set SATA controller to native mode(Serial ATA mode - SATA Port 1). This
mode is only supported by Windows XP or later.

Integrated Peripherals

On-Chip Primary PCI IDE

[Enabled]

On-Chip Secondary PCI IDE

[Enabled]

On-Chip SATA

[Auto]

x SATA Port0 configure as

SATA Port0

SATA Port1 configure as

SATA Port1

USB Controller

[Enabled]

USB 2.0 Controller

[Enabled]

USB Keyboard Support

[Disabled]

USB Mouse Support

[Disabled]

Legacy USB storage detect

[Enabled]

AC97 Audio

[Auto]

Onboard H/W LAN

[Enabled]

OnBoard LAN Boot ROM

[Disabled]

Onboard Serial Port 1

[3F8/IRQ4]

Onboard Serial Port 2

[2F8/IRQ3]

Onboard Parallel Port

[378/IRQ7]

Parallel Port Mode

[SPP]

x ECP Mode Use DMA

KLJI

: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F6: Fail-Safe Default

F7: Optimized Defaults

Item Help
Menu Level

Summary of Contents for GA-8I865G775-G

















































































Search results

Summary of Contents for GA-8I865G775-G

Reviews:

Related manuals for GA-8I865G775-G

Brands by name

Popular brands

Gigabyte GA-8I865G775-G, User Manual

Search results

Summary of Contents for GA-8I865G775-G

Reviews:

Related manuals for GA-8I865G775-G

Brands by name

Popular brands