Gigabyte GA-8I845PE Pro, User Manual

Page: 39 / 96

- 35 - BIOS Setup
English
IDE Chan nel 0 Master, Slave / IDE Ch annel 1 Master, Slave
The category identifies the types of hard disk from drive C to F that has been installed in the computer.
There are two types: auto type, and manual type. Manual type is user-definable; Auto type which will
automatically detect HDD type.
Note that the specifications of your drive must match with the drive table. The hard disk will not work
properly if you enter improper information for this category.
If you select User Type, related information will be asked to enter to the following items. Enter the
information directly from the keyboard and press <Enter>. Such information should be provided in the
documentation form your hard disk vendor or the system manufacturer.
CYLS. Number of cy linders
HEADS Number of heads
PREC OMP Write precomp
LANDZONE Landing zone
SECT ORS Number of sec tors
If a hard disk has not been installed select NONE and press <Enter>.
Drive A / Drive B
The c ategory identifies the ty pes of floppy disk driv e A or driv e B that has been installed in the
computer.
None No floppy driv e installed
360K, 5.25" 5.25 inch PC-ty pe standard driv e; 360K by te capacity .
1.2M, 5.25" 5.25 inch AT-ty pe high-density driv e; 1.2M by te capacity
(3.5 inch w hen 3 Mode is Enabled).
720K, 3.5" 3.5 inch double-sided driv e; 720K by te capacity
1.44M, 3.5" 3.5 inch double-sided driv e; 1.44M by te capacity .
2.88M, 3.5" 3.5 inch double-sided driv e; 2.88M by te capacity .