27
Jumper Setting
2) JP3 (Onboard VGA Functon)
1-2 close: VGA Enabled
(Default)
2-3 close: VGA Disabled
4) JP5 (SCSI Function)
1-2 close: SCSI Enables (Default)
2-3 close: SCSI Disabled
1) JP2 (10/100 LAN Function)
1-2 close: LAN Enabled (Default)
2-3 close: LAN Disabled
Please note, You may clear the CMOS
data to its default values by this jumper
5) JP6 (Primary PCI-X Bus Speed Function)
1-2 close: 100MHz (Default)
2-3 close: 133MHz
6) JP7 (Secondary PCI-X Bus Speed Function)
1-2 close: 100MHz (Default)
2-3 close: 133MHz
Please note that the the highlight w hite
mark is presented as Pin 1.
1
1
1
1
3) JP4 (Clear CMOS Function)
1-2 close: Clear CMOS (Default)
2-3 close: Normal
1
1
1
1
1
1
1
1