Gigabyte GA-890FXA-UD5, User Manual, Page: 90 / 120

Appendix - 90 -
Model Name RAID Level Capacity Status Members(HDDx)
RDD0: GRAID 0-Stripe 240 GB Normal 01
[
fg
TAB]-Switch Window [
hi
]-Select ITEM [ENTER]-Action [ESC]-Exit
[ RAID Disk Drive List ]
[ Main Menu ] [ Hard Disk Drive List ]
Gigabyte Technology Corp. RAID Setup Utility v1.07.16G
Create RAID Disk Drive
Delete RAID Disk Drive
Revert HDD to Non-RAID
Solve Mirror Conflict
Rebuild Mirror Drive
Save And Exit Setup
Exit Without Saving
Model Name Capacity Type/Status
HDD0: ST3120026AS 120 GB RAID Inside
HDD1: ST3120026AS 120 GB RAID Inside
7. Save and Exit Setup: After configuring the RAID array, select the Save And Exit Setup item in the main
screen to save your settings before exiting the RAID BIOS utility, then press <Y> (Figure 10).
Model Name RAID Level Capacity Status Members(HDDx)

RDD0: GRAID 0-Stripe 240 GB Normal 01
[
hi
]-Select RAID [SPACE]-Mark Delete [DEL]-Confirm [ESC]-Abort
[ RAID Disk Drive List ]
[ Main Menu ] [ Hard Disk Drive List ]
Gigabyte Technology Corp. RAID Setup Utility v1.07.16G
Create RAID Disk Drive
Delete RAID Disk Drive
Revert HDD to Non-RAID
Solve Mirror Conflict
Rebuild Mirror Drive
Save And Exit Setup
Exit Without Saving
Model Name Capacity Type/Status
HDD0: ST3120026AS 120 GB RAID Inside
HDD1: ST3120026AS 120 GB RAID Inside
Now, you may proceed to create the SATA RAID/AHCI driver diskette and the installation of the SATA RAID/
AHCI driver and operating system.
Delete the RAID Array:
To delete the array, select Delete RAID Disk Drive in the main menu and press <Enter>. The selection bar
will move to the RAID Disk Drive List block. Press the <SPACE> key on the array to be deleted; a small tri-
angle will appear to mark the selected array. Press <Delete>. When prompted to confirm your selection (Figure
11), press <Y> to confirm or <N> to cancel.
Figure 10
Figure 11
Save to Disk & Exit (Y/N) ? Y
ALL DATA ON THE RAID WILL LOST!!
ARE YOU SURE TO DELETE (Y/N) ? N