Gigabyte GA-7VA, User Manual

Page: 42 / 96

- 36 - GA-7VA Motherboard
English
F
Boot Up Floppy Seek
M
During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360 K type is 40
tracks 720 K, 1.2 M and 1.44 M are all 80 tracks.
8
Enabled BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note
that BIOS can not tell from 720 K, 1.2 M or 1.44 M drive type as they are
all 80tracks.
8
Disabled BIOS will not search for the type of floppy disk drive by track number. Note
that there will not be any warning message if the drive installed is 360 K.
(Default value)
F
Password Check
8
System The system can not boot and can not access to Setup page will be denied
if the correct password is not entered at the prompt.
8
Setup The system will boot, but access to Setup will be denied if the correct
password is not entered at the prompt. (Default value)
C
Flexible AGP 8X
8
Auto Automatically set AGP transfer rate according to AGP compatibility and stability.
(Default value)
8
8X Always set AGP transfer rate to 8X if the 8X mode supported by the AGP card.
8
4X Set AGP transfer rate to 4X mode no matter what the AGP transfer rate the card is.
F
Init Display First
M
This feature allows you to select the first initation of the monitor display from which card, when
you install an AGP VGA card and a PCI VGA card on board.
8
PCI Set Init Display First to PCI Slot.
8
AGP Set Init Display First to AGP. (Default value)