background image

- 21 -

Hardware Installation

16)  BAT (Battery)

 

The battery provides power to keep the values (such as BIOS configurations, date, and time information) 

in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a 

low level, or the CMOS values may not be accurate or may be lost.

You may clear the CMOS values by removing the battery: 

1.  Turn off your computer and unplug the power cord.

2.  Gently remove the battery from the battery holder and wait for 

one minute. (Or use a metal object like a screwdriver to touch 

the positive and negative terminals of the battery holder, making 

them short for 5 seconds.)

3.  Replace the battery. 

4.  Plug in the power cord and restart your computer.

  Always turn off your computer and unplug the power cord before replacing the battery.

  Replace the battery with an equivalent one. Danger of explosion if the battery is replaced with an incorrect model.

  Contact the place of purchase or local dealer if you are not able to replace the battery by yourself or uncertain about the bat-

tery model.

  When installing the battery, note the orientation of the positive side (+) and the negative side (-) of the battery (the positive 

side should face up).

  Used batteries must be handled in accordance with local environmental regulations.

17)  PASS_DIS (Skip Supervisor Password Jumper)

1-2 Close: Normal operation. (Default setting)

2-3 Close: Skip supervisor password.

1

1

Summary of Contents for GA-7TCSV4





















































Reviews: