- 33 -
Hardware Installation
GA-7PCSLX
1 2
12 24
Pin No. Signal Name
Definition
1
PWLED+
Power LED Signal anode (+)
2
5VSB
5V Stanndby Power
3
NC
No Pin
4
ID LED Signal anode (+)
5
PWLED-
Power LED Signal cathode(-)
6
ID_LED-
ID LED Signal cathode(-)
7
HD+
Hard Disk LED Signal anode (+)
8
F_SYSRDY
System Front board LED Signal
9
HD- (GND)
Ground
10
SYS_STATUS-
System Status LED Signal cathode(-)
11
PWB+
Power Button Signal anode (+)
12
L1_ACT
LAN1 active LED Signal
13 PWB+_GND
Ground
14
L1_LINK-
LAN1 Link LED Signal cathode(-)
15
Reset button Signal anode (+)
16
SENSOR_SDA
SMBus Data Signal
17
RST_BTN_GND
Ground
18
SENSOR_SCL
SMBus Clock Signal
19
ID_SW+
ID Switch Signal anode (+)
20
CASE_OPEN-
Chassis intrusion Signal cathode(-)
21
ID_SW (GND)
Ground
22
L2_ACT
LAN2 active LED Signal
23
NMI_SW-
NMI switch Signal cathode(-)
24
L2_LINK-
LAN2 Link LED Signal cathode(-)
15) FP_1 (Front Panel Header/GA-7PCSLX)
The front panel design may differ by chassis. A front panel module mainly consists of power switch,
reset switch, power LED, hard drive activity LED, speaker and etc. When connecting your chassis
front panel module to this header, make sure the wire assignments and the pin assignments are
matched correctly.
