Gigabyte GA-7DX+ User Manual Download

Page: 100 / 143

BIOS Setup

••••

System After AC Back

Last State

When AC-power back to the system, the system will return to the
Last state before AC-power off.

Off

When AC-power back to the system, the system will be in “Off”
state. (Default Value)

When AC-power back to the system, the system will be in ”On”
state.

•

PME Event Wake Up

Disabled

Disable PME event wake up function.

Enabled

The PME event wake up will bring the system out of soft-off or
suspend state if this option is set “Enabled”. (Default Value)

•

USB Dev Wakeup from S3-S5

Enabled

Enable USB Device Wakeup from ACPI S3, S4 and S5 mode.

Disabled

Disable USB Device Wakeup from ACPI S3, S4 and S5 mode.
(Default Value)

•

PS2 K/B Wakeup from S3

Enabled

Enable PS2 K/B Wakeup from S3 mode.

Disabled

Disable PS2 K/B Wakeup from S3 mode. (Default Value)

••••

ModemRingOn/WakeOnLan

Disabled

Disable Modem Ring On / Wake On LAN function.

Enabled

The modem ring / LAN wake up will bring the system out of soft-off
or suspend state if this option is set “Enabled”. (Default Value)

••••

MODEM Use IRQ

Set MODEM Use IRQ to NA.

Set MODEM Use IRQ to 3. (Default value)

Set MODEM Use IRQ to 4.

Set MODEM Use IRQ to 5.

Set MODEM Use IRQ to 7.

Set MODEM Use IRQ to 9.

Set MODEM Use IRQ to 10.

Set MODEM Use IRQ to 11.

Summary of Contents for GA-7DX+
















































































































































Search results

Summary of Contents for GA-7DX+

Reviews:

Related manuals for GA-7DX+

Brands by name

Popular brands

Gigabyte GA-7DX+, User Manual

Search results

Summary of Contents for GA-7DX+

Reviews:

Related manuals for GA-7DX+

Brands by name

Popular brands