Suspend to RAM Installation
26
Suspend To RAM Installation (Optional)
A.1 Introduce STR function:
Suspend-to-RAM (STR) is a Windows 98 ACPI sleep mode function. When recovering from
STR (S3) sleep mode, the system is able to retrieve the last “state” of the system before it
went to sleep and recover to that state in just a few seconds. The “state” is stored in memory
(RAM) before the system goes to sleep. During STR sleep mode, the system uses only
enough energy to maintain critical information and system functions, primarily the system
state and the ability to recognize various “wake up” triggers or signals, respectively.
A.2 STR function Installation
Please use the following steps to complete the STR function installation.
Step-By-Step Setup
Step 1:
To utilize the STR function, the system must be in Windows 98 ACPI mode.
Putting Windows 98 into ACPI mode is fairly easy.
Setup with Windows 98 CD:
A.
Insert the Windows 98 CD into your CD-ROM drive, select Start, and then Run.
B. Type
(without
quotes)
“D:\setup” in the window provided. Hit the enter key or click OK.
C.
After setup completes, remove the CD, and reboot your system
(This manual assumes that your CD-ROM device drive letter is D:).
