- 27 -
System Hardware Installation
3-5-2 Installing the Memory
Before installing a memory module, make sure to turn off the computer and unplug the power
cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR4 DIMMs on this motherboard.
Follow these instructions to install the Memory:
1. Insert the DIMM memory module vertically into the DIMM slot, and push it down.
2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3. Reverse the installation steps when you want to remove the DIMM module.
1
2
2
3-5-3 DIMM Population Table
Type
Ranks Per DIMM
and Data Width
DIMM
Capacity (GB)
Speed (MT/s); Voltage (V);
Slots per Channel(SPC) and
DIMM per Channel (DPC)
1 Slot per
Channel
2 Slots per
Channel
DIMM Density
1DPC
1DPC
2DPC
8Gb
1.2V
1.2V
1.2V
RDIMM
SRx
4
16GB
3200
3200
3200
RDIMM
DRx8
16GB
Summary of Contents for G492-PD0
