manualshive.com logo in svg

Gigabyte G292-Z24, User Manual, Page: 93 / 149

Share
Download
Gigabyte G292-Z24 User Manual Download Page 93

BIOS Setup

- 93 -

5-3-1-1 Performance

Parameter

Description

Performance

OC Mode

(Note1)

Option Available: Normal Operation, Customized
Default setting is 

Normal Operation

.

Custom Core Pstates

Allows you to accept or decline enabling Custom Core Pstates. When 
accepted, you can disable or customize core pstates.

CCD/Core/Thread Enablement

Allows you to accept or decline enabling CCDs, processor cores and 
threads. When accepted, you can control the number of CCDs to be 
used, the number of cores to be used, and whether to enable or disable 
Simultaneous Multithreading Technology (SMT) support.

SMT Control

Can be used to disable symmetric multithreading. To re-enable SMT, a 
POwer CYCLE is needed after select the 'Enable' option. Select 'Auto' base 
on BIOS PCD. (PcdAmdSmtMode) default setting.
Option Available: Enable, Disable.
Default setting is 

Disable

.

(Note1)  Advanced items are configurable when this item is defined.

Summary of Contents for G292-Z24






















































































































































Reviews:

No comments