Gigabyte G1.Sniper B7 User Manual Download Page 6

Page: 6 / 40

1-2 Product Specifications

CPU

Support for Intel

Core

™

i7 processors/Intel

Core

™

i5 processors/

Intel

Core

™

i3 processors/Intel

Pentium

processors/

Intel

Celeron

processors in the LGA1151 package

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset

Intel

B150 Express Chipset

Memory

4 x DDR4 DIMM sockets supporting up to 64 GB of system memory

* Due to a Windows 32-bit operating system limitation, when more than 4

GB of physical memory is installed, the actual memory size displayed will

be less than the size of the physical memory installed.

Dual channel memory architecture

Support for DDR4 2133 MHz memory modules

Support for ECC UDIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)

Support for non-ECC UDIMM 1Rx8/2Rx8/1Rx16 memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard

Graphics

Integrated Graphics Processor-Intel

HD Graphics support

- 1 x DVI-D port, supporting a maximum resolution of 1920x1200@60 Hz

* The DVI-D port does not support D-Sub connection by adapter.

- 1 x HDMI port, supporting a maximum resolution of 4096x2160@24 Hz

* Support for HDMI 1.4 version.

Maximum shared memory of 512 MB

Audio

Realtek

ALC1150 codec

NE5532

operational amplifier

High Definition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN

Intel

GbE LAN chip (10/100/1000 Mbit)

Expansion Slots

1 x PCI Express x16 slot, running at x16 (PCIEX16)

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIEX16 slot.

1 x PCI Express x16 slot, running at x4 (PCIEX4)

2 x PCI Express x1 slots

(All of the PCI Express slots conform to PCI Express 3.0 standard.)

2 x PCI slots

* Refer to "1-8 Internal Connectors," for the supported configurations with the M.2,

SATA Express, SATA connectors, and PCI slots.

1 x M.2 Socket 1 connector for the wireless communication module (M2_WIFI)

Multi-Graphics

Technology

Support for 2-Way AMD CrossFire

™

technology

Storage Interface

Chipset:

- 1 x M.2 Socket 3 connector (M2F_32G)

- 1 x SATA Express connector

- 6 x SATA 6Gb/s connectors

* Refer to "1-8 Internal Connectors," for the supported configurations with the M.2,

SATA Express, SATA connectors and PCI slots.

- 6 -

Summary of Contents for G1.Sniper B7









































Search results

Summary of Contents for G1.Sniper B7

Reviews:

Brands by name

Popular brands

Gigabyte G1.Sniper B7, User Manual

Search results

Summary of Contents for G1.Sniper B7

Reviews:

Brands by name

Popular brands