English
G-MAX
TM
FB Series User's Manual
5
2. After loosening the 3 front screws and pulling out the optical disk drive, loosen the screws
of the hard disk drive rack and then remove the hard disk drive rack
.
3. Put the hard disk drive into the rack, and align the screws at the screw holes.
4. CPU
4-1. Place the CPU into the CPU socket on the motherboard. Make sure that you have lifted the
transversal lever and aligned the aslant side of the CPU along the aslant side of the CPU
socket.
4-2. After CPU is secured tightly onto the CPU socket, release the transversal lever and attach
it to the CPU socket.
4-3. Evenly spread the heat dispersion paste on the CPU and make sure it totally covers the
CPU. The CPU fan must be tightly attached on the CPU to maximize the effect of heat
dispersion.
4-4. Connect the CPU fan connector to the CPU FAN position on the motherboard.
V. Installing the System
1. Unscrew the rear casing, and push the upper casing toward the front panel.
Loosen the screws,
and remove the hard
disk drive rack.
Pull and lift the optical
disk drive rack.
