manualshive.com logo in svg

Gigabyte E252-P31, User Manual

Share
Download
Gigabyte E252-P31 User Manual Download Page 51

- 51 -

BIOS Setup

Parameter

Description

AMI PCI Bus Driver Version

Displays the AMI PCI Bus Driver version information.

Above 4G Decoding

Enable/Disable memory mapped I/O to 4GB or greater address 
space (Above 4G Decoding).
Options available: Enabled/Disabled. Default setting is 

Disabled

.

SR-IOV Support

If the system has SR-IOV capable PCIe devices, this item 
Enable/Disable Single Root IO Virtualization Support. 
Options available: Enabled/Disabled. Default setting is 

Enabled

.

Change Settings of the Following PCI 
Devices

Slot #8 Occupied
Onboard Device_#

 

Š

PCI Latency Timer

 

– Value to be programmed onto PCI Latency Timer 

Register.

Options available: 32/64/96/128/160/192/224/248 PCI Bus 
Clocks. Default setting is 

32 PCI Bus Clocks

.

 

Š

PCI-X Latency Timer

 

– Value to be programmed onto PCI Latency Timer 

Register.

Options available: 32/64/96/128/160/192/224/248 PCI Bus 
Clocks. Default setting is 

64 PCI Bus Clocks

.

 

Š

VGA Palette Snoop

 

– Enable or disable VGA Palette Registers Snooping.

Options available: Enabled/Disabled. Default setting is 

Disabled

.

 

Š

PERR#

 

– Enable or disable PCI device to generate PERR.

Options available: Enabled/Disabled. Default setting is 

Disabled

.

 

Š

SERR#

 

– Enable or disable PCI device to generate SERR.

Options available: Enabled/Disabled. Default setting is 

Disabled

.

Disable Above 4G Decoding

Options available: Enabled/Disabled. Default setting is 

Disabled

.

Disable PCIe Init

Options available: Enabled/Disabled. Default setting is 

Disabled

.

Disable PCIe GEN2

Options available: Enabled/Disabled. Default setting is 

Disabled

.

Summary of Contents for E252-P31





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands