manualshive.com logo in svg

Gigabyte B450M K, User Manual

Share
Download
Gigabyte B450M K User Manual Download Page 28

- 28 -

RAID Levels

RAID 0

RAID 1

RAID 10

Minimum Number of 

Hard Drives

≥2

2

4

Array Capacity

Number of hard drives * 

Size of the smallest drive Size of the smallest drive

(Number of hard drives/2) * 

Size of the smallest drive

Fault Tolerance

No

Yes

Yes

Before you begin, please prepare the following items:

This motherboard supports RAID 0, RAID 1, and RAID 10. Prepare the correct number of hard drives as indicated 

in the table above before configuring a RAID array.

 

•

SATA hard drives or SSDs. To ensure optimal performance, it is recommended that you use two hard drives 

with identical model and capacity.

 

•

Windows setup disc.

 

•

An Internet connected computer.

 

•

A USB thumb drive.

Chapter 5  Appendix

5-1  Configuring a RAID Set

 

&

Please visit GIGABYTE's website for details on configuring a RAID array.

https://www.gigabyte.com/WebPage/313/am4-raid.html?m=sw

An M.2 PCIe SSD cannot be used to set up a RAID set with a SATA hard drive.

Summary of Contents for B450M K































Reviews:

No comments

Brands by name

Popular brands

Load more brands