background image

- 21 -

Monitor User’s Manual

ASS (AORUS Smart System) of Image Sticking Prevention

APCS (AORUS Prevention Compensation System)

To reduces the risk of image retention occurrence, if the monitor has 
been in use for more than 4 hours, the APCS will start automatically 
after the monitor is switched off. You can also start the APCS manually 
via the OSD menu. 
When the APCS process begins, the montior will display a warning 
message and the power LED starts flashing white. When the power LED 
lights off, this indicates the APCS process is complete. The duration of 
the APCS process is around 5 minutes.

AOCS (AORUS Organic Compensation System)

To reduces the risk of image retention occurrence, if the monitor has 
been in use for more than 1500 hours, the AOCS will start automatically 
after the monitor is switched off. You can also start the AOCS manually 
via the OSD menu. 
When the AOCS process begins, the montior will display a warning 
message and the power LED starts flashing white. When the power LED 
lights off, this indicates the AOCS process is complete. 

• 

The duration of the AOCS process is around 1 hour.

• 

During the AOCS process, the appearance of white scanning lines on 
the screen is considered normal.

Note:

 

• 

If you need to turn off the monitor during the APCS/AOCS process, press 
the   button on the remote control or move the Control button down (

).

• 

During the APCS/AOCS process, DO NOT disconnect the power cable from 
the monitor.

• 

Avoid turning on the monitor during the APCS/AOCS process. If you turn 
on the monitor, the APCS/AOCS process will be interrupted and will restart 
after the monitor is turned off.

• 

If the APCS/AOCS item in the OSD menu is grayed out, this indicates that 
the monitor has not been in use for more than 4 hours or 1500 hours 
respectively.

Summary of Contents for AORUS F048U



















































Reviews: