Charge the batteries
1.
There is a micro-USB nano-receiver. Use the micro-USB line in the box to charge
the batteries by plugging the other side into the USB port. The BLUE indicator
light will start to blink to show that the battery is charging.
2.
Charge your keyboard until the indication light stops blinking.
3.
The red LED light indicates that batteries inside needs to be re-charged.
Rechargeable battery notice
Danger
Do not attempt to disassemble or modify the battery pack. Attempting to do so can
cause an explosion, or liquid leakage from the battery pack. A battery pack other
than the one specified, or a dissembled or modified battery pack is not covered by
the warranty.
Built-in rechargeable battery notice
Danger
Do not attempt to replace the internal rechargeable lithium batteries. Please contact
support for replacement.
Troubleshooting and Tips:
1.
Make sure you have connected the receiver correctly on the PC’s USB port
2.
For the best performance, we suggest you to locate the receiver with a distance
from other electric devices, such as the computer monitor or external storage
devices
3.
Make sure you have set the communications between the receiver and the
keyboard. Refer to the communication section.
4.
Some system devices might conflict with the keyboard. Confirm the IRQ/address
settings of these devices for conflicts, and change the settings as required.
5.
When the battery is low, the RED indication light will start blinking. Please charge
the batteries.
6.
When your keyboard is inactive, it will enter standby mode. The keyboard lights
will turn off. Your keyboard is not broken or powered off. Press any key and wait
for three seconds, and the keyboard will revert to its normal state.
7.
To prolong keyboard life, we suggest switching off the power after each use.
8.
Some multi-function keys (eg. Windows, capslock. print, home, play, next,
previous, mute, and scroll-lock, etc.) may not be effective or activate certain
programs on mobile devices.