3
2-3 Connection for Ethernet User
Step 1. Please prepare an Ethernet cable (RJ- 45) first.
Step 2. Connect the Ethernet cable to the WAN port of the GN-BR402.
Step 3. Connect an end of the network cable to the ADSL/Cable Modem of the Ethernet
connection port.
Step 4. Connect any port of the area network LAN1, 2, 3, & 4 of the GN-BR402 to your PC.
Step 5. Connect the adapter to the power connection slot of the GN-BR402.
Step 6. Insert the adapter to the power socket.
Please check if the light of the WAN port of the GN-BR402 is lit. If not, try to use
the cross over (RJ- 45) Ethernet cable that comes with this product.
Step 7. The connection procedure is completed.
2-4 Connection for USB Port User
(If you use USB connection, please refer
to this section.)
Please repeat Steps 1~3 of Section 2-3.
Step 4. Connect the USB transmission cable to the USB port of the GN-BR402 and the USB port
at the PC end.
Step 5. Please install the USB driver program by the CD that comes with the GN-BR402.
(Please refer to Appendix B for the installation of the USB driver program).
