6WXM
4-8
•
Halt on
The category determines whether the computer will stop if an error is
detected during power up.
NO Errors
The system boot will not stop for any error that
may be detected and you will be prompted
All Errors
Whenever the BIOS detects a non-fatal error the
system will be stopped
All, But Keyboard
The system boot will not stop for a keyboard error;
it will stop for all other errors
All, But Diskette
The system boot will not stop for a disk error; it will
stop for all other errors
All, But Disk/Key
The system boot will not stop for a keyboard or
disk error; it will stop for all other errors
•
Memory
The category is display-only which is determined by POST (Power On
Self Test) of the BIOS.
Base Memory
The POST of the BIOS will determine the amount of base (or
conventional) memory installed in the system.
The value of the base memory is typically 512 K for systems
with 512 K memory installed on the motherboard, or 640 K for
systems with 640 K or more memory installed on the
motherboard.
Extended Memory
The BIOS determines how much extended memory is present
during the POST.
This is the amount of memory located above 1 MB in the CPU's
memory address map.
Summary of Contents for 6WXM
