Gigabyte 6WFZ7 Series, User Manual, Page: 58 / 88

6WFZ7 Series Motherboard
49
•
Swap Floppy Drive
Enabled Floppy A & B will be swapped under DOS.
Disabled Floppy A & B will be normal definition. ( Default value )
•
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360 K
type is 40 tracks 720 K, 1.2 M and 1.44 M are all 80 tracks.
Enabled BIOS searches for floppy disk drive to determine it is 40 or 80 tracks.
Note that BIOS can not tell from 720 K, 1.2 M or 1.44 M drive type as
they are all 80 tracks. ( Default value )
Disabled BIOS will not search for the type of floppy disk drive by track number.
Note that there will not be any warning message if the drive installed is
360 K.
•
Boot Up NumLock Status
On Keypad is number keys. ( Default value )
Off Keypad is arrow keys.
•
Gate A20 Option
Normal Set Gate A20 Option is Normal.
Fast Set Gate A20 Option is Fast. ( Default value )
•
Typematic Rate Setting
Enabled Enable Keyboard Typematic rate setting.
Disabled Disable Keyboard Typematic rate setting. ( Default value )
•
Typematic Rate (Chars / Sec.)
6-30 Set the maximum Typematic rate from 6 chars. Per second to 30
characters. Per second. ( Default value : 6 )
•
Typematic Delay (Msec.)
250-1000 Set the time delay from first key to repeat the same key in to computer.
( Default value : 250 )