Gigabyte 6VXE User Manual Download Page 62

Page: 62 / 92

6VXE

4-19

•

Suspend Mode

The default value is Disabled.

Disabled

Disabled Suspend Mode.

1 min - 1 Hour

Setup the timer to enter Suspend Mode.

•

VGA

The default value is OFF.

OFF

Disable monitor VGA activity.

Enable monitor VGA activity.

•

LPT & COM

The default value is LPT/COM.

LPT/COM

Enabled LPT/COM Ports Activity.

NONE

Normal Operation.

LPT

Enabled LPT Ports Activity.

COM

Enabled COM Ports Activity.

•

HDD & FDD

The default value is ON.

Enabled HDD & FDD Ports Activity

OFF

Disabled HDD & FDD Ports Activity

•

DMA/master

The default value is OFF.

Don’ t detect DMA/master PM event.

OFF

Normal Operation.

•

Wake Up On LAN/Ring

The default value is Disabled.

Enabled

Enable Wake Up On LAN/Ring

Disabled

Disable Wake Up On LAN/Ring

Summary of Contents for 6VXE





























































































Search results

Summary of Contents for 6VXE

Reviews:

Related manuals for 6VXE

Brands by name

Popular brands

Gigabyte 6VXE, User Manual

Search results

Summary of Contents for 6VXE

Reviews:

Related manuals for 6VXE

Brands by name

Popular brands