Gigabyte 6LMM7, User Manual

Page: 50 / 76

6LMM7
4-10
•
Swap Floppy Drive
The default value is Disabled.
Enabled Floppy A & B will be swapped under DOS
Disabled Floppy A & B will be normal definition
•
VGA Boot From
The default value is AGP.
AGP VGA Boot From AGP
PCI VGA Boot From PCI
•
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive installed is 40 or 80
tracks. 360
K type is 40 tracks 720 K, 1.2 M and 1.44 M are all 80 tracks.
The default value is Enabled.
Enabled BIOS searches for floppy disk drive to determine it is 40 or
80 tracks. Note that BIOS can not tell from 720
K, 1.2 M or
1.44 M drive type as they are all 80 tracks
Disabled BIOS will not search for the type of floppy disk drive by track
number. Note that there will not be any warning message if
the drive installed is 360
K
•
Boot Up NumLock Status
The default value is On.
On Keypad is number keys
Off Keypad is arrow keys
•
Typematic Rate Setting
The default value is Disabled.
Enabled Enable Keyboard Typematic rate setting.
Disabled Disable Keyboard Typematic rate setting.
•
Typematic Rate (Chars / Sec)
The default value is 6.
6-30 Set the maximum Typematic rate from 6 chars. Per second
to 30 chars. Per second.