background image

                    
                 

                      FCC Compliance Statement: 

This equipment has been tested and found to 
comply with limits for a Class B digital device , 
pursuant to Part 15 of the FCC rules. These limits 
are designed to provide reasonable protection 
against harmful interference in residential 
installations. This equipment generates, uses, and 
can radiate radio frequency energy, and if not 
installed and used in accordance with the 
instructions, may  cause harmful interference to 
radio communications. However, there is no 
guarantee that interference will not occur in a 
particular installation. If this equipment does cause 
interference to radio or television equipment 
reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try to correct the interference by 
one or more of the following measures: 

-Reorient or relocate the receiving antenna 

-Move the equipment away from the receiver 

-Plug the equipment into an outlet on a circuit different from that to which the 
receiver is connected 

-Consult the dealer or an experienced radio/television technician for additional 
suggestions 

You are cautioned that any change or modifications to the equipment not expressly 
approve by the party responsible for compliance could void Your authority to 
operate such equipment. 

This device complies with Part 15 of the FCC Rules. Operation is subjected to the 
following two conditions 1) this device may not cause harmful interference and 2) 
this device must accept any interference received, including interference that may 
cause undesired operation.      

 

DECLARATION OF CONFORMITY

 

Per FCC Part 2 Section 2. 1077(a)  

Responsible Party Name: G.B.T. INC.

 

Address: 18305 Valley Blvd., Suite#A

 

LA Puent, CA 91744

 

Phone/Fax No: (818) 854-9338/ (818) 854 -9339

 

hereby declares that the product  

Product Name: 

 

Model Number:

 

Mother Board 

Conforms to the following specifications: 

FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),  
Class B Digital Device 

Supplementary Information:

 

This device complies with part  15 of the FCC Rules. Operation is subject to the 
following two conditions:   (1)   This device may not cause harmful 
and   (2)   this device must accept any inference received, including 
that may cause undesired operation. 

Representative Person's Name:     ERIC LU 

Signature: 

Date:       Mar. 24, 2000  

Eric Lu

 

   

GA-6CMC7,GA -6CMC7R  

 

Summary of Contents for 6CMC7 Series






























































































Reviews: