Gigabyte 3D Rocket, Installation Manual

Page: 13 / 63

- 13 -
GH-PCU22-SE
English
Figure 1
Figure 2-3
Figure 3
Figure 4
Installation Instructions for AMD K7 Clip
Figure 2-1 Figure 2-2
A
B
Figure 1
Please add an adequate layer of heat sink paste on the
surface of the CPU. The picture on the right shows the three
insert spaces on the cooler bracket where the CPU clips
attach.
Figure 2
Place point A of the clip (Figure2-1)on point B at the bottom
of the cooler(Figure2-2).As Figure 2-3.
Figure 3
Align the three spaces on the cooler with the three clips on
the base of the CPU and make sure point A of the clip
(Figure 2-1) is placed on point B at the bottom of the cooler
(Figure 2-2) and push down on the clip until it’s firmly
locked.
Figure 4
Connect the 3-pin connector to the CPU fan connector on the
motherboard. Clip Installation is now complete.
If fan speed control is required, please refer to
"Installation of the Fan Speed Control Cable".