7-4 Cut a tube into suitable
size; connect one side of
the tube with the second
splitter on 4-way splitter
valve(1) and connect the
other side with the outlet
of chipset waterblock and
fasten the tube clips.
7-5 Cut a tube into suitable
size; connect one side
of the tube with the first
splitter on 4-way splitter
valve(2) and connect the
other side with the inlet of
chipset waterblock and
fasten the tube clips.
7-6 Before turning on the
power, please make sure
all tube clips are fastened
(as shown on Figure a,
Figure b and Figure c)
and switch on the 4-way
splitter valve.
7-7 To accomplish liquid cooling system, after turning on the power, appropriately pour
coolant into the tank.
Figure a
Figure b
Figure c
Figure d
While removing the tubes for disassembly, please make sure to switch off
4-way splitter valve, turn off the power and keep all the devices away from
any electronic part.
23
En
glis
h
Summary of Contents for 3D Galaxy II GH-WIU02
Page 1: ...GH WIU02 English User s Manual 3D Galaxy II ...
Page 24: ...24 English ...