10
2-2. REAR PANEL
Names and functions of the Rear Panel fans and connectors are as follows:
➀
Cooling fan for power supply
This fan starts to rotate when connecting the power code on the rear panel and the
POWER SWITCH on the front panel is activated.
➁
Main
cooling fan
This fan starts to rotate when connecting the power code on the rear panel and the
POWER SWITCH on the front panel is activated.
AC-IN connector
This connector is for connecting AC cable. Please use specified power cable to connect
AC power. The voltage range is within 90-264V, 50/60Hz.
RS-422 A
and
RS-422 B
(
OPTION
)
This D-Sub 9-pin female connector is for the RS-422. Remote control by editors or
slow-motion controllers is possible by using RS-422 SONY protocol. Two connectors are
responsible for controlling Recorder and Player CH-A (The assignment of connectors
can be changed to Player CH-A and Player CH-B if needed).
USB3.0 connectorx2
USB3.0 female connector (Type-A). An external SSD Drive and the other USB3.0
equipment can be connected. The maximum transfer rate is 5 Gbps.
HDMI connector
HDMI female connector. The digital monitor out with the HDMI specification.
Ethernet connector
RJ-45 LAN connector for connecting Gigabit Ethernet cable.
➀
➁