4
3. Hardware Specifications
Label
Description
20V/3A
A Type-C connector for USB-PD
20V/3A DC input
PWR IN / LINE
G.hn combo port, 1* RJ45 connector and 1*F-type
coax connector alternative, and both of them support
PoC
G1/G2
2 *10/100/1000Base-T RJ45 Ethernet ports with
802.3af/at PoE+
MDI/MDI-X selection: automatic
Cable specification: CAT5 or CAT6 UTP
RST
Press and hold the RST button on the front panel
beyond 15s to reset G4202TCP to factory default
configuration
4. Application and Installation
Long Reach POE solution is designed to extend IP Ethernet transmission and inject
power into a remote 8.2.3af/at PoE compliant power device (PD) beyond the 100 meters
limit of Ethernet.
The G4202TCP supports 2 ways as power source to inject 802.3af/at PoE to remote
standard PDs (power Devices)
⚫
Remote G4202TCP power supplied from Headend G4224 switch over coaxial cable
or UTP cable.
⚫
Local DC power from power supply through G4202TCP’s USB Type-C connector.
Note
Before installation, please consider the distance and watts value
demand for PD devices. The G4202TCP output capacity and
upload/download performance depends on the length of the UTP and
coaxial cable
Note
The G4202TCP has two power input options. Only one mode is
available at the same time, when both local DC power and remote
G.hn power provide power for G4202TCP, it is recommended to
connect the local DC power first, and then remote G.hn power.
