Giga-tronics GT-1040A Microwave Power Amplifier
Introduction
Operation Manual, Part Number 34981, Rev. A, January 2011
5
Controls, Indicators, and Connectors, Continued
The tables below describe the functions of the features shown in Figure 1 and Figure 2 on the previous page.
Table 1: GT-1040A Front Panel Controls, Indicators, and Connections
Name
Function
Power on LED
•
Extinguished when AC power is OFF.
•
Illuminated blue when AC power is ON.
RF OUT (RF output connector)
GT-1040A: 2.92 mm (f)
Table 2: GT-1040A Rear Panel Controls, Indicators, and Connections
Name
Function
Power Switch
Switches the unit on and off.
Fuse
Field replaceable fuse.
AC Connector
AC power input.
RF IN (RF Input connector)
GT-1040A: 2.92 mm (f)
Fan
Cooling fan for unit (internal)
2.3
Receiving and Inspection
Follow the procedure in Table 3 for receiving and inspecting the GT-1040A.
Table 3: Receiving and Inspection of the GT-1040A
Step
Action
1.
Before opening the shipping container, inspect it for any signs of damage.
If THERE IS evidence of damage
; record the location and extent of the damage and contact the
shipper immediately to report the damage.
If there is NO EVIDENCE of damage
; continue to the next step.
2.
Open the shipping container and inspect the contents for evidence of damage. The contents
should include the following:
•
GT-1040A Microwave Power Amplifier
•
Operation Manual
•
AC line cord
If any of the contents are damaged or missing, contact Giga-tronics immediately. Refer to the
Contact Information on the inside of the front cover of this manual.
End of procedure
