Giga-tronics 8650A Series, Operation Manual

Page: 121 / 240

Remote Operation
Manual 31470, Rev. E, April 2001 3-47
3.2.27 Preset Configuration
*RST
STATus:PRESet
SYSTem:PRESet
*RST
Example : OUTPUT @Pwr_mtr;*RST ! Reset 8650A configuration
Description : This command resets the 8650A configuration to a known condition (see Table 3-4).
These are not the power ON conditions. The 8650A has an internal battery which powers
a non-volatile memory chip to retain configuration information. The only configuration that
will change between power OFF and power ON is noted at the end of the table.
STATus:PRESet
Example : OUTPUT @Pwr_mtr;STAT:PRES ! Clears all the status register value
Description : This command resets the 8650A Status information buffers. See Table 3-4. Note that
these are not the power ON conditions.
SYSTem:PRESet
Example : OUTPUT @Pwr_mtr;SYST:PRES ! Reset 8650A configuration
Description : This command resets the 8650A configuration to a known condition. SYST:PRES is
identical in function to *RST. (Command Default, Minimum, Maximum)
Table 3-4: Reset and Power on Default Commands
Command Default Minimum Maximum
CALCulate1[:CHANnel]:
CALCulate2[:CHANnel]: POWer 1
POWer 2 ,
CALCulate1-2:
LIMit
STATe
UPPer
LOWer
FAIL?
FCOunt?
MAXimum:
STATe
[MAGnitude]
MINimum:
STATe
[MAGnitude]
MODE
REFerence:
STATe
[MAGnitude]
STATe
UNIT
OFF
299.999
-299.999
0
0
OFF
299.999
OFF
-299.99
NORmal
OFF
0
ON
dBm
-299.999
-299.999
-299.999
-29.999
-299.99
299.999
299.999
299.999
29.99
299.99
INITiate:CONTinuous OFF ,
MEASure1-2[:SCALar:POWer] With Auto average on ,
MEMory[:TABLe]:
CHANnel
FREQuency
POWer
SELect ANALOGout
SLOPe
VOLTage
UNIT 1
0
-80,20
0
-10,10
dBm
1
0
-80,-80
0
-10,-10
2
40e9
20,20
10e9
10,10