GIGA-TMS TR4020, User Manual

Page: 19 / 161

19
Once again, this Section explains how
to use the Programming Menu, not the
meaning of individual Settings. See
All
Main Menu Items if you have a question
about a particular Setting.
To edit a Setting, you must first select
it. Supposing you want to set the Bell
duration . First, scroll to the “Bell duration”
line in the Main Menu, then press .
Notice that the function bar at the
bottom of the LCD screen will change- the
F-keys will have different meaning while
you edit the Setting.
To change the Item’s value, use the numerical keypad of the TR40xx for input, ( F3 ) as a
Backspace, and / keys as Cancel and Set ( Cancel and Enter keys will also work).
C.1.4. Editing Bell and Default Event tables
“Setup” folder of the Main Menu also contains two data tables- the Bell table and the Default Event
table. This Section only explains how to work with data tables, not what they mean. The latter is explained in
Using Default Event Table and Controlling external Bell (Ring) .
Both data tables of the TR40xx can contain up to 32 records (entries). You can add, edit and delete the
records. By default the tables are empty.
The explanation below deals with the Default Event table- open it by scrolling to the “Edit def. event
tab.” In the “Setup” folder of the Main Menu and press . If the table is empty, it only shows the Add
Record prompt.